|Product Name:||Wireless Bug Detector||Frequency:||20-3000Mhz|
|Detecting Signal:||Mobile Phone, WiFi, Bluetooth, GPS, Pinhole Camera, Spy Camera||Battery:||3000mA|
|Package Size:||21.5x12.5x5cm||Package Weight:||500g|
electronic bug detector,
wireless bug detector
LED Signal Frequency Detector 20-3000Mhz Detect Mobile Phone 1.2G 2.4G GPS Camera
This detector is the first to use high-tech chips and advanced technology to realize the functionsof adjustable power and sensitivity, frequency lock, etc., Which brings great convenience to the detection equipment, which is incomparable to ordinary signal detectors.
When detecting, the power of the equipment can be adjusted from 0% → 100% as needed. After finding the signal, the signal frequency can be locked to make the detection signal with clear purpose, and the detection range can be narrowed step by step to achieve fast and efficient detection.
The device detected frequency range in 20-3000MHz, can detect signals such as mobile phone signal, wifi signal, Bluetooth signal, GPS signal, etc., find pinhole cameras, spy camera devices, location tracking devices, walkie-talkies, etc. with ease.
It is especially suitable for celebrities, corporate executives, leaders, political and business people, frequent business travelers, or people daily access and places with high privacy.
1. Adjustable power and sensitivity;
2. Detector that can lock frequency;
3. According to the adjustment of power sensitivity and lock frequency, accurate search can be realized;
4. Can be detected with clear target,step by step;
5. Black aluminum alloy metal outside, simple and elegant, anti-drop and anti-scratch;
6. Large and clear display screen, the detection data is clear at a glance;
7. Vibration and light flash signal detected reminder, easy to know the result without affecting others
|50 Ohm (BNC connector)|
|Detecting signal:||Mobile phone signal, 2.4G 1.2G wireless camera, GPS, Bluetooth,Walkie talkie etc.|
|Power supply:||5V 1A|
|Display content:||Frequency, detection power, set power, battery left|
1. The wireless eavesdropping device or tracker is installed in the car and office premises and business negotiation venues;
2. The mobile phone is eavesdropped or abnormal;
3. Work environment, there is radiation around the house;
4. Checking hotel toilets, hotels, bathrooms, dressing rooms, recreational schools, school supervision, military facilities, etc.;
5. Radio waves coincidentally acting on the table;
6. Mortgage cars, used cars, pawnshops, guarantee companies, small money companies, information finance companies.
Instructions for use:
1. The detector set power is 0% with the highest sensitivity and 100% with the lowest sensitivity;
2. Open the package, install the antenna on the detector;
3. Quickly turn the switch knob clockwise to the far right;
a. At this time, the display shows: frequency is 0, detection power is 0, set power is 100%;
b. The power light below the device lights in a counterclockwise direction, indicating that the device can work normally.
4. Slowly adjust the knob until the RF power indict of the device starts to flash, the frequency starts to appear on the display, and the device starts to vibrate;
5. Fine-tune the knob back and forth until the detected frequency data does not change much, immediately press and hold the side hold button to lock the frequency;
6. Finely adjust the knob clockwise until the device no longer vibrates, just only need to detect the direction that near the detector antenna is until the detector re-vibrates and flash;
7. Repeat 3-5 until you find the detected device.
1. The set power of 0% has the highest sensitivity and 100% has the lowest sensitivity;
2. Be sure to quickly adjust the knob to 100% of the set power when starting up;
3. The power set for a long time is low, because the sensitivity is too high, it will cause a crash, shut down and restart;
4. If the crash cannot be repaired, you can also use the reset button at the bottom to reset.
Contact Person: Jena