|
Product Details:
|
| Product Name: | Mobile Signal Amplifier | Working Frequency: | EGSM900 LTE2600 Dual Band |
|---|---|---|---|
| HS CODE: | 8543709200 | Output Power: | 23dBm |
| Size: | 268mm*58mm*189mm | Weight: | 3.5kg |
| High Light: | mobile phone signal repeater,cell phone booster repeater |
||
EGSM 900 LTE 2600 Dual Band Mobile Signal Repeater 23dBm Power 3000m2 Range
Descriptions:
Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for both two wireless system
in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is
connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the
building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it
can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from
over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With
good looking & super compact design also make it attractive. Besides, it is easy installation feature is also
for individual customers to install the booster by themselves, and it does not need much professional
knowledge and instrument.
Please keep away from heating-equipment, because the booster will dissipate heat when working. And do
not cover booster with anything that influences heat-dissipation.
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source
6. Cover about 500~3000m² without block or obstruct.
7. High linear design, ALC function design, low interference to BTS.
8. Support any cellular devices (voice & data & video)
9. Wide band signal booster, or customize selective band booster.
Advantages:
Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.
Set the technical parameters simple and efficient, this is easier than DIP Switch.
Specifications:
| Frequency Range | Uplink | Downlink | |||
| EGSM900+ LTE2600 | 880 - 915/2500 - 2570MHz | 925 - 960/2620 - 2690MHz | |||
| Max. Gain | 70dB | 75dB | |||
| Max. Output Power | 17dBm | 23dBm | |||
| Band width | Wide Band | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| Automatic Gain Control | >30dB | ||||
| Ripple in Band | ≤8dB | ||||
| Noise Figure | ≤ 6dB | ||||
| VSWR | ≤ 2.0 | ||||
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Impedance | 50 ohm | ||||
| Power Supply | AC 90-264V,DC 9V/5A | ||||
| Power LED | Power indicator | ||||
| Alarm LED | Red | Self oscillation or Strong input signal | |||
| Green | Normal | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -20°C ~ +55°C | ||||
| Environment Conditions | IP40 | ||||
| Installation Type | Wall Installation | ||||
| Size | 268mm*58mm*189mm | ||||
| Weight | < 3.5Kg | ||||
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Contact Person: Ms. Jena
Tel: +86-15818561923
