|Product Name:||CDMA Cell Phone Booster||Support System:||CDMA 800Mhz|
cell phone signal boosters,
cell phone signal extender
23dBm Wireless Indoor Mobile Phone Signal Booster CDMA 800 Mhz For Home
The CDMA Cell Phone Signal Booster Kit is the best kit for boosting cell signal in your Home Or Office.
Eliminate dropped calls and increase data speeds with a signal booster.
Indoor Cell Phone Signal Booster series is an ideal solution for wireless system in small/medium
businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial
cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has
easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio
coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation,
therefore maintaining a high voice quality and avoid adding interference to network. With good looking &
super compact design also make it attractive. Besides, it is easy installation feature is also for individual
customers to install the booster by themselves, and it does not need much professional knowledge and
Cost effective solution for weak signal zones, reduce drop/off calls.
Compact size, low power consumption,
easy installation, great cover.
Expansion and extending of the signal of base station.
Optimization of the quality of the signal and source
Cover about 500~3000m² without block or obstruct.
High linear design, ALC function design, low interference to BTS.
Support any cellular devices (voice & data & video)
Wide band signal booster, or customize selective band booster.
Can customize other system CDMA450, LTE700, LTE800, iDEN, CDMA800/GSM850,
GSM900, EGSM, AWS1700, DCS1800, PCS1900,WCDMA, LTE2600,etc
Manual gain control (MGC 31dB range) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
can customize the Cover Image on the Cell Phone Signal Booster, design private styles
If there are strong input signal or severe self oscillation, ISO LED is red.
If there are good input signal, AGC LED is green.
|Max. Output Power||17dBm||23dBm|
|Band width||Wide Band|
|Manual Gain Control||31dB / 1dB Step|
|Automatic Gain Control||>30dB|
|Ripple in Band||CDMA,GSM≤6dB; DCS,PCS≤8dB；|
|Noise Figure||≤ 6dB|
|Intermodulation Products||9KHz~1GHz||≤ -36dBm|
|Spurious Emission||9KHz~1GHz||≤ -36dBm|
|Time Delay||≤ 1.5 μs|
|Frequency stability||≤ 0.01ppm|
|MTBF||> 50000 hours|
|Power Supply||AC 90-264V,DC 9V/3A|
|Power LED||Power indicator|
|ISO(Alarm LED)||Red||Self oscillation or Strong input signal|
|Cooling||Heatsink Convection cooling|
|Operating Temperature||-20°C ~ +55°C|
|Installation Type||Wall Installation|
AC90-264V, DC5V/3A power supply adapter 1PCS
AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
Installation kit 1PCS
User manual 1PCS
Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
5D-FB coaxial cable with connecter (Cable length optional)
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
Contact Person: Jena